Accessories 

Bearings   Delrin   Timing Belts   Wheels & Buffers   Comp Unit   Wagon Loads  

 

 WM Figures  WM Castings  Bullet Uncoupler

Brake Van Casting Sets  MagClic Range

 


  

 


 

The original MagClic is sold in pairs £7.50 a pack or £35 for 5 pair.

 
Please allow 2-3 weeks minimum for deliveryfor the MagClic Range this IS DUE TO THE HIGH DEMAND.
On the whole the feedback for the original MagClic so far has been good however there

 

 has been some difficulty fitting them to Heljan coaches, to help you with this CLICK HERE

BUY NOW



A new addition to the MagClic range is the ingenious MagClic Swing, invented by Kevin Trim of Dorset Kits. First shown at the Bristol "O" Gauge Show this MagClic is fitted to the loco (in most circumstances it replaces the existing coupling).  The other half of the Swing is fitted to the first coach or wagon in the rake, when the two come together the magnets Swing up and lock.  Alternatively the operator can use the two coupling hooks manually as normal.  The MagClic Swing is priced at £8.00 a pair and M&M Models have a purpose built demo for shows with all three MagClics covered. 

 

Recent feedback from David  Vaughan (see below) suggests that the swing when used in conjunction with a three link coupling on a small  goods train will help with shunting manoeuvres.  He uses the typical cafe wooden coffee stirrer to push them apart  This is ideal for the typical exhibition out and back layout. (Thanks for the pictures David :)

Email from David

If anyone else has any other MagClic tips or ideas that they would like to share please contact us.

BUY NOW

The adaptor are priced at £5.00 a pair.  This MagClic was developed to couple and uncouple a non magnetic vehicle ie.. Three link or similar to the rear of the train.  Another use is it assists for the loco to run around the train and couple up at the opposite end. Recent feedback from modellers leads us to believe that it also has a use in small goods trains.

BUY NOW



 

 

Timing Belt Drive



 

Check out Watch Em Run for video of our timing belts on a Gauge 1 Loco

 

The benefits of these timing belts compared to Delrin Chain is they are easy to fit, give positive and

quiet running and they are more pliable than delrin chain. 

Each kit comes complete with its own Allen Key for securing the pulleys

The dimensions of the pulley are

 

ID 3/16

WIDTH 9.2 mm

OD 14mm

 

The pulleys and belts are industrial quality and perfectly matched.

 

TBDK01
for class 37 50 55 59 60 66
TBDK02
for class  40 44 45
TBDK03
for class  20 22 25 + DMU (8'6" WB)
TBDK04
for class  26 27 33
TBDK05
for class  31
TBDK06
for class 35 42
TBDK07
for class  52
TBDK08
TBDK09
for class  56
FOR CLASS 47
TB2NP
NARROW PULLEY


A new addition to the Timing Belt Range will be the class 47 TBDK 09

Illustrated above is the Narrow Pulley comparison.

The pulley supplied is a 16 tooth 3/16 bore 6.65mm wide with no boss. 

The locating grub screw is accessed within the teeth


BUY NOW


Bullet Coupler / Uncoupler

   

From Dorset Kits

Bullets have a powerful built in LED Lamp and a sturdy hook to enable the user to couple and uncouple

trains with lightning speed.  The Bullet is especially useful in dark areas of a model railway.

 

BUY IT NOW


Bearings

681X

1.5mm ID x 4.0mm OD x 1.2mm WIDE (Pack Of Four)

681XZZ

1.5mm ID x 4.0mm OD x 2.0mm WIDE (Pack of Four)

682ZZ

2mm ID x 5mm OD x 2.3mm WIDE (Pack Of Two)

684ZZ

4mm ID x 9mm OD x 4mm WIDE (Pack Of Two)

624

4mm ID x 13mm OD x 5mm WIDE (Pack Of Two)

685

5mm ID x 11mm OD x 3mm WIDE (Pack Of Two)

625ZZ

5mm ID x 16mm OD x 5mm WIDE (Pack Of Four)

695ZZ

5mm ID x 13mm OD x 4mm WIDEE (Pack Of  Two)

SR1AF2

0.0550" ID x 3/16" OD x 0.0781" WIDE (Pack Of Two)

SR133AF2

3/32" ID x 3/16" OD x 3/32" WIDE (Pack Of Two)

SR144ZZ

1/8" ID x 1/4" OD x 0.1094" WIDE (Pack Of Four)

R2

1/8 ID x 3/8 OD x 5/32 WIDE (Pack Of Two)

SR156ZZ

3/16" ID x 5/16" OD x 1/8" WIDE (Pack Of Two)

FR2

1/8 ID x 3/8 OD x 5/32 WIDE - FL 7/16 (Pack Of Two)

FR144JZZS

1/8 ID 1/4 OD 0.031 WIDE - FL 0.296 (Pack of Four)

FSR156ZZ

3/16 ID x 5/16 OD x 1/8 WIDE - FL .359" (Pack Of Two)

SFR186

3/16 ID x 1/2 OD x 5/32 WIDE - FL .564" (Pack Of Two)

BUY IT NOW


Delrin
 



DELRIN CHAIN HANDY DRIVE PACK (BO BO)
DELRIN CHAIN HANDY DRIVE PACK (CO CO)
DELRIN CHAIN 1FT LENGTH
16TOOTH 3/16" BORE DELRIN SPROCKETS
 12TOOTH 3/16" BORE DELRIN SPROCKETS
10TOOTH 3/16” BORE DELRIN SPROCKETS
12TOOTH   1/8" BORE DELRIN SPROCKETS
 8TOOTH    1/8" BORE DELRIN SPROCKETS
BUY IT NOW


Welcome Wheels & Buffers

                      
3'7" Solid Disc Coach Wheel 3'1" 3 Hole Disc Wagon Wheel 2'8 ½" Solid Disc Lowmac Wheel


 
New Welcome Wheels 3'1" 3 Hole Disc  Coarse Scale Wagon Wheel
Pictured in the NEW Welcome Wheels Compact Blister Pack

              

    
We can also provide Slaters and ABS Models wheels and buffers
CLICK HERE for our full range. 
  BUY NOW

Compensation Unit

This highly successful simple unit for flat floor wagons was developed by KJT Handmade Models and Marketted by
M&M Models It consists of etched brass frets and brass bearings which will enable
the modeller to modify 4 axles (ie. 4 wagons worth)


BUY NOW 

Wagon Loads
MRL01
Unpainted Box Container To Diagram 3/003 In Resin
MRL02
Unpainted Type AF Container Insulated In Resin

BUY NOW

             

 

White Metal Modern Image Figures

This range of 10 modern image figures are available in white metal unpainted as per the price list. 

For figures painted to order allow 6 - 8 weeks and contact us direct with your requirements.

MBF/07 UNPAINTED 

Set 1  Ultrasonic Team (From Left to right Fig 1 - 5)  Separate Figures Also Available

FIG 1       

 Set 2 (A group of Atkins Testers) (From Left to Right Fig 6 - 10)  Separate Figures Also Available

             

Pictured Below is the full set of 10 figures      

 

White Metal Casting Sets For Brake Van Type

Diagram  1/500        BUY NOW

           

Diagram  1/506       BUY NOW

       

 

Under Construction Roadwork

White Metal Castings

Hover Mouse Over Image For Description